What is the difference between the LightWELD 1500 XR and 2000 XR?

The 1500 XR delivers up to 1,500W and welds steel and aluminium to 6.35mm. The 2000 XR delivers up to 2,000W (3,000W peak) and handles steel and aluminium to 8mm, titanium to 7mm, copper to 3mm.

Is Industrial Laser Solutions an authorised LightWELD supplier?

Yes. Industrial Laser Solutions in Hallam, Victoria is the authorised Australian and New Zealand supplier of IPG LightWELD systems. Cameron Jamieson of ILS is acknowledged in the 2024 Weld Australia Laser Safety Technical Guidance Note TGN-SW02.

Do I need a laser licence in Australia?

Most states have no standalone laser operator licence. However Western Australia and Tasmania impose additional radiation licensing requirements. All operators must use appropriate PPE and operate in a designated laser-controlled area.

Is LightWELD compliant with AS3820?

Yes. LightWELD systems are manufactured in the USA and are fully compliant with AS3820. Many cheap Chinese laser welders do not meet AS3820, which can void insurance and create WHS liability.

What power supply does a LightWELD require?

The LightWELD 1000, 1500 XC, and 1500 XR require 220V single phase 24A. The 2000 XR requires 220V single phase 33A. All are compatible with standard Australian and New Zealand single-phase power infrastructure.

Can I get a demonstration before buying?

Yes. Industrial Laser Solutions is based in Hallam Victoria and can arrange live demonstrations at our facility. Contact us on (03) 9796 3055 or sales@industriallaser.com.au.

Is handheld laser welding accepted under Australian welding standards?

Yes. Handheld laser welding is explicitly accepted under ASME BPVC Section IX (2023 and 2025 Edition) via QW-358 — with IPG LightWELD specifically referenced in the qualification provisions. It is also implicitly accepted under ISO 15614-11:2025, AS/NZS ISO 3834, AS/NZS 1554 structural steel, and AS/NZS 1665 structural aluminium.

What is ASME BPVC Section IX QW-358?

QW-358 is the section added to ASME BPVC Section IX in the 2023 edition that explicitly accepts handheld laser welding for boilers, pressure vessels, and process piping. IPG LightWELD technology is referenced in the qualification provisions.

How do I qualify a laser welding procedure in Australia?

The Australian compliance pathway involves 6 steps: develop a WPS per ISO 15609-6, qualify via WPQR per ISO 15614-11:2025, certify to AS/NZS ISO 3834, qualify operators per AS/NZS 9606-1 process i52, for pressure vessel work qualify under ASME BPVC Section IX QW-358, and reference AS 3992 for pressure equipment.

LightWELD Handheld Laser Welding & Cleaning | Industrial Laser Solutions Southeast Asia

Mag-weld Gamit angLiwanag.Mag-work Nang Mas Matalino.

Ang Industrial Laser Solutions ang authorised IPG LightWELD supplier ng Australia at New Zealand, na ngayon ay dinadala ang parehong handheld at robotic fibre laser welding at cleaning systems sa Singapore, Malaysia, Indonesia, Thailand, Vietnam at Philippines — mas mabilis, mas madaling matutunan, at eksepsyonal na kalidad sa malawak na hanay ng mga metal.

Hanapin ang Inyong Sistema

Bawat LightWELD system ay ginawa gamit ang industrial fibre laser technology, manufactured sa USA ng IPG Photonics. Sino-supply, sinesserbisyuhan, at sinusuportahan sa buong Australia at New Zealand ng Industrial Laser Solutions. May sariling dedicated page ang bawat model sa ibaba na may kumpletong specifications.

LightWELD

1000

Handheld laser welding — perpekto para sa manipis na sheet metal at precision work

Laser Power	1,000 W
Max Penetration (Steel)	4 mm
Duty Cycle	100% at full power
Presets	75+

Thin Sheet MetalFabricationAuto Body

Tingnan ang LightWELD 1000

LightWELD

1500 XR

eXtended Range — mas malawak na kapasidad sa material at thickness

Laser Power	Up to 1,500 W
Steel / Al 3&5 Series	Up to 6.35 mm
Preset Modes	74

FabricationPipingAerospace

Tingnan ang LightWELD 1500 XR

1500 XC

Handheld welding & cleaning — mag-weld at mag-clean gamit ang isang machine lang

Laser Power	Up to 1,500 W
Max Penetration (Steel/Al)	4 mm
Cleaning Width	Up to 15 mm

FabricationAuto BodyConstruction

Tingnan ang LightWELD 1500 XC

LightWELD

2000 XR

Maximum power para sa pinakamakapal na materials at pinakamabigat na fabrication

Laser Power	Up to 2,000 W
Steel / Al 3&5 Series	Up to 8 mm
Preset Modes	100

Heavy FabricationStructuralAerospace

Tingnan ang LightWELD 2000 XR

LightWELD full product range — 1000, 1500 XR, 1500 XC, 2000 XR

LightWELD sa Workshop

Consistent, high-quality na resulta sa iba't ibang materials at thicknesses — mula sa pipe welding hanggang thin-sheet fabrication.

LightWELD handheld laser welding pipe joint

Piping & Structural

Pipe-to-flange welding — minimal spatter, malinis na seam

Laser Cleaning

Pre-weld laser cleaning — walang chemicals, walang wire brushes

Sheet Metal Fabrication

T-weld sa manipis na sheet — halos walang distortion

Welder using LightWELD handheld laser welding system

Industrial Application

Full PPE — helmet na may IR shield, OD7+ glasses, gloves

LightWELD 2000 XR

Maximum power — 2,000W, hanggang 8mm penetration

Precision Welding

Tight seams, kaunting post-weld finishing na kailangan

Anim na Dahilan para
Lumipat sa Laser

Mula sa inyong unang weld hanggang sa isang-libong weld, naghahatid ang LightWELD ng consistency, speed, at quality na hindi kayang tapatan ng traditional methods.

⚡

Hanggang 4× Mas Mabilis

Ang mga trabahong tumatagal ng ilang oras ay natatapos na sa ilang minuto lang. Dramatic na pagtaas ng throughput para makapag-take-on ang inyong team ng mas maraming trabaho, mas kumikita — sa parehong headcount.

🎯

Minimal na Distortion

Ang highly focused heat input ay nangangahulugang halos walang warping — kahit sa manipis na sheet metal at heat-sensitive na materials. Mas kaunting rework, mas magandang finished quality.

📚

Madaling Matutunan

Dahil sa 100+ optimised presets, kayang gumawa ng professional welds ng mga baguhan mula pa unang araw. Mas maikling training time, mas mababang skill barriers, consistent na quality sa buong team ninyo.

🔧

Mag-weld & Mag-clean

May integrated pre- at post-weld laser cleaning ang XC at XR models. Palitan ang nozzle sa ilang segundo lang — walang chemicals, walang grinding, walang extra equipment na kailangan.

⛏

Multi-Material

Steel, aluminium, copper, titanium, dissimilar metals — lumipat nang hindi binabago ang polarity o electrodes. Piliin ang preset ninyo at mag-weld na. Walang nasasayang na setup time.

🛡️

Built-in na Safety

Class IV na may key switch, E-stop, 2-step trigger, fibre laser interlock, at part contact sensor. Kasama ang full PPE kit. AS3820 compliant.

Mas Mababang Running Costs.
Mas Magandang Resulta.

Ang day-to-day running costs ng laser welding ay karaniwang mas mababa kaysa arc welding sa lahat ng aspeto.

Counting costs — how laser welding compares to MIG and TIG welding

Mas Kaunting Filler Wire

Gumagamit ang laser welding ng hanggang 10× Less na filler wire kumpara sa MIG o TIG — nang hindi binabawasan ang lakas ng weld.

Kalahati ang Torch Consumables

Ang laser torch consumables ay humigit-kumulang ½ as Much lang kumpara sa MIG torch consumables bawat taon.

Mas Kaunting Finishing Time

Dahil sa minimal na spatter at walang excess material, humigit-kumulang 6 hrs less na finishing work bawat linggo.

Tunay na Resulta,
Tunay na Welders

Sa 41 taon ko sa negosyo, hindi pa ako nakakita ng welder na kayang gawing tulad ng seasoned pro ang isang baguhan. Halos wala nang learning curve.

Workshop Manager

Metal Fabrication, Victoria

Isang trabaho na umabot ng mahigit 2 oras ay natapos sa loob ng 11 minuto. Binago ng productivity gain na ito ang aming negosyo at nagpahintulot sa aming tumanggap ng mas maraming trabaho.

Operations Director

Manufacturing, New South Wales

Nagbukas ang laser welding ng bagong market para sa amin. Pumupunta sa amin ang mga customer kapag hindi na gumagana para sa kanila ang conventional welding.

Owner-Operator

Custom Fabrication, Queensland

Mag-weld Gamit angLiwanag.Mag-work Nang Mas Matalino.

Hanapin ang Inyong Sistema